Search

PTFE Gland Packing Seal

PTFE gland packing seal is made of pure PTFE dispersion resin. It is first made into a raw material film, and then twisted and woven into packing. This kind of packing has no other additives and can be widely used in food and pharmaceuticals. , papermaking, chemical fiber, etc. have higher cleanliness requirements, and valves and pumps with highly corrosive media.

Scope of application: Maximum temperature: 260°C, maximum operating pressure: 2.0MPa, PH value: 0-14.

Pure PTFE Packing

Introduction: The PTFE packing is made of pure PTFE fiber, without PTFE emulsion and lubricating grease treatment. Because it is made of solid braid and has flexibility and adjustability, it can be well matched with the shaft and stuffing box and has excellent corrosion resistance, good self-lubrication and anti-sticking.

Size: From 6 x 6 mm to 50 x 50mm.

Packaging: In coils of 5 to 10 kg, other weight on request.

Application: It can be used in chemicals, food, medicine, paper, chemical fiber, fine chemicals, and other fields where pollution is not allowed.

Graphite PTFE Gland Packing

Introduction: PTFE braided (impregnated) packing is made of F4 raw material tape by warp braiding (impregnated), with good chemical stability, good self-lubricating performance, unchanged strength under high temperatures and humid environment, and easy to load and dismantle.

Size: From 6 x 6 mm to 50 x 50mm. Packaging: In coils of 5 to 10 kg, other weight on request.

Application: It can be used in
chemicals, food, medicine, paper, chemical fiber, fine chemicals, and other fields where pollution is not allowed.

Working temperature-240°C~280°C
PH Range0~14
Pressure27.5 bar/296 bar
Speed20 m/s
Equipmentrotating & reciprocating equipment, valves, soot blowers, expansion joints
Application Mediachemicals, solvents, corrosives, gases, water, steam, ammonia, air, oils, paper stock, liquor, condensate, boiler feed water

 

Scroll to Top